Frequently Asked Questions

Below are some of the most frequently asked questions we receive in the Service Department. Since each vehicle is a little different, we advise you to always refer to your owner's manual on specific specifications such as oil level, spark plug gap, tire pressure, etc. If you have a question that is not answered here, please feel free to email us at service@kingwoodharley.com

1. Do I need an appointment for a Texas State Safety Inspection?

- No, we do not take appointments for inspections. We inspect from 09:00 AM until 5:30 PM. Inspections are done first come, first served and you may wait up to 30 minutes. But there is always hot coffee and good conversation to help pass the time.

2. What is the minimum tire tread required to pass inspection?

- The State of Texas requires a minimum of 3/32 tire tread in three different spots in order to pass inspection.

3. Where can I find my service maintenance schedule?

- Each vehicle has a different maintenance schedule. You can find your specific schedule listed in the back of your owner's manual or service manual. You may also contact the Service Department to find out when your vehicle should be serviced.

4. What is DYNO tuning?

- When a motorcycle rolls off the production line, it is calibrated to run with stock components and under certain weather conditions. DYNO custom tuning tweaks your bike to run to the exact performance components you have installed in your specific environment to bring you optimum performance results.

5. What is your shop rate?

- Our shop rate is $85.00 an hour

Does your motorcycle have a current, open recall? Need some piece of mind? No problem, email your VIN information to service@kingwoodharley.com and we will gladly verify that there are no current open campaigns that will affect your vehicle's safety or performance.